Sunday, June 26, 2011

Calibration Print

2202:04 Test .stl print start
2204:45 Sensors indicate extrusion inadequate. Recommend tightening extruder idler.
2205:02 Idler tightened. Extrusion increased to acceptable levels.
2206:18 Test .stl print complete.
2206:33 Recommend, tighten x belt. Loosen y belt. Re-calibrate all axes.
2211:15 Host software closed, power lost to board....

Goodnight, John. We've made some progress today.

1 comment:

  1. just linked this article on my facebook account. it’s a very interesting article for all.